PRODUCT OVERVIEW:

The EXT series of industrial emergency lighting units are designed to be affordable, durable and dependable. The NEMA 4x rated fiberglass housing can be used in most damp, wet and hose down areas. The EXT series has been designed with a pulse switching charger. The pulse switching charger offers superior performance & energy efficiency versus conventional constant voltage chargers. Traditional top mounted Par36 style heads are standard.

CONSTRUCTION:

The EXT series is constructed with a durable NEMA 4x rated fiberglass cabinet. Industrial gray finish is standard. Emergency lighting heads are molded from 2 high impact thermoplastic, two top mounted Par36 style 9w heads. Lamp head styles are constructed of high impact thermoplastic. Please note: Par36 style food-prep approved lenses are also available when ordering. Integrated mounting feet ensure proper and secure installation. External test switch and monitor LED are standard.

ILLUMINATION:

Available with 2, top mounted Par36 style lamp heads. 6V TUNGSTEN: standard: 9w, (H) halogen: 8w, 10w, 12w, 20w 6V SEALED BEAM: (SB) standard: 9w, 12w, 18w (SBH) halogen: 12w, 20w 12V TUNGSTEN: standard: 9w, 18w (H) halogen: 8w, 12w, 20w, *35w, *55w (*LR only) 12V SEALED BEAM: (SB) standard: 12w, 18w (SBH) halogen: 8w

BATTERY TECHNOLOGY:

The EXT series is designed with maintenance free, sealed valve regulated lead acid battery that provides a minimum emergency duration of 90 minutes (for the listed rating). Recharge time of the battery is twenty-four (24) hours. The maximum working temperature is 50 C.

INSTALLATION:

The EXT is suitable for surface wall mounting. Suitable for NEMA 4x required installations. The front access panel is hinged for trouble-free installation and maintenance. Four integrated mounting feet ensure proper, secure and accurate wall or ceiling installation on to most surfaces.

ELECTRICAL SPECIFICATIONS:

Charger Type: fully automatic current limited charger with solid state linelatched low voltage disconnect protection
Utility Input: 120/277VAC, 60 Hz.
Temperature Range: Max 50 C
Recharge Duty Cycle: 24 hours
Load Transfer: A solid state transfer circuit provides load connection.
Controls: Momentary tETS switch and LED AC-On indicator light
Safety Circuitry: AC Lockout: Prevents battery discharge prior to initial unit power-up saving installation time.
Low Voltage Battery Disconnect: Protects the battery from being severely damaged by deep discharge during prolonged power failures. Brownout Protection: Automatically switches the unit to emergency mode when utility voltage is reduced to the point at which most fluorescent light fixtures would extinguish.

CODE COMPLIANCE:

ETL listed to UL924 standards.

PRODUCT ATTRIBUTES