PRODUCT OVERVIEW:

The ETS series of emergency lighting units offers durable construction, easy installation and the ability to adapt to your specifications. The ETS housing is constructed from durable 20 gauge steel & finished in a white powder coat. Top mounted Par36 style heads are standard. Par18 style heads are optional. Universal mounting pattern and conduit knock-outs allow for easy field installation adaptability.

CONSTRUCTION:

The ETS series is constructed with a 20 gauge steel cabinet. Magnum terminal connectors allow for larger gauge wires to be connected for remote loads. White finish is standard (other colors optional). Emergency lighting heads are molded from high impact thermoplastic in a matching color; Par36 style are standard, Par18 style are optional. Both head types feature a unique twist locking collar that securely holds the lens and facilitates quick and easy re-lamping. Universal mounting pattern and key hole slots are stamped on the back and conduit knockouts on the sides of unit. External test switch and monitor LED are standard.

ILLUMINATION:

Emergency lighting heads are molded from high impact thermoplastic; Par36 style are standard, Par18 style are optional. 6V TUNGSTEN: standard: 9w, halogen: 8w, 10w, 12w, 20w 6V SEALED BEAM: standard: 9w, 12w, 18w halogen: 12w, 20w 12V TUNGSTEN: standard: 9w, 18w halogen: 8w, 12w, 20w, *35w, (*PAR36 only) 12V SEALED BEAM: standard: 12w, 18w halogen: 8w

BATTERY TECHNOLOGY:

The ETS series is designed with a maintenance free, sealed valve regulated lead acid battery that provides a minimum emergency duration of 90 minutes (for the listed rating). Recharge time of the battery is twenty-four hours. The maximum working temperature is 50 C.

INSTALLATION:

The ETS is suitable for surface wall or ceiling and pendant mounting. Suitable for indoor installation. The universal mounting pattern stamped into the back of the unit allows for direct mounting to various conduit boxes. Key hole slots and conduit knockouts are provided for additional mounting possibilities. Remote lamp loads are connected to the emergency power supply with sturdy magnum terminal connectors. These connectors allow for a large gauge of wire to be used increasing the flexibility of installation.

ELECTRICAL SPECIFICATIONS:

Charger Type: fully automatic current limited charger with solid state linelatched low voltage disconnect protection
Utility Input: 120/277VAC, 60 Hz.
Temperature Range: Max 50 C
Recharge Duty Cycle: 24 hours
Load Transfer: A solid state transfer circuit provides load connection.
Controls: Momentary tETS switch and LED AC-On indicator light
Safety Circuitry: AC Lockout: Prevents battery discharge prior to initial unit power-up saving installation time.
Low Voltage Battery Disconnect: Protects the battery from being severely damaged by deep discharge during prolonged power failures. Brownout Protection: Automatically switches the unit to emergency mode when utility voltage is reduced to the point at which most fluorescent light fixtures would extinguish.

CODE COMPLIANCE:

ETL listed to UL924 standards.

PRODUCT ATTRIBUTES